SPOTLINE SERIES · MICRO-REFLECTOR TUBULAR LIGHT
Micro-Reflector Optics.
Precision Directional Accent.
Spotline integrates micro-reflector cup optics to shield the LED source and deliver clean, low-glare directional light. Three selectable beam angles provide the precision required for accent, display and architectural illumination.
Engineering layout support, custom mounting hardware, CNC machined end caps, DALI-2/0-10V controls, and photometric data.
PRODUCT & MANUFACTURING CAPABILITIES
Micro-reflector precision.
Clear beams, controlled glare.
Spotline uses an integrated array of micro-reflector cups to shield the LED source and shape clean, directional illumination. With selectable beam angles, single- or double-sided output and flexible project configurations, it delivers precise light with consistent visual definition.
Micro-Reflector Optics
Individual reflector cups shield the LED source, control glare and produce clearly defined directional light.
20° / 32.8° / 48° Beam Options
Choose 20° for focused accents, 32.8° for balanced directional light, or 48° for broader architectural illumination.
Single or Double Emission
Single-sided output provides focused directional light, while optional double-sided emission supports more balanced spatial illumination.
Configurable Scale
Available in Ø45 mm and Ø70 mm profiles with configurable lengths from 300 to 1500 mm.
Flexible Installation
Suitable for wall-mounted, ceiling-mounted or suspended applications, with floor-standing configurations also available.
Architectural Durability
A UV-resistant PC housing combines IP67 ingress protection with IK10 impact resistance for indoor and outdoor use.
Optical Configuration
Beam distribution, output, fixture dimensions, finishes and control protocols coordinated to project requirements.
Beam Effect Verification
Pre-production samples allow beam spread, glare control, light output and finished appearance to be reviewed before batch production.
Photometric Support
Project-specific drawings, technical data and photometric files prepared for lighting calculations, coordination and approval.
Optical Consistency
Beam definition, LED performance, electrical operation, sealing and finished appearance inspected against the approved configuration.
01 / OPTICS & BEAM CONTROL
Choose the beam. Define the light.
Spotline’s micro-reflector cups shield each LED and shape clean, low-glare directional illumination. Three beam angles allow the light effect to be matched precisely to the required surface, object or spatial zone.
- 20° focused beam
- Concentrated illumination for accents, displays and architectural details.
- 32.8° medium beam
- A balanced distribution for directional lighting across defined areas.
- 48° wide beam
- Broader architectural beam spread for general surface illumination and visual comfort.
02 / LIGHT DISTRIBUTION
One optical language. Two emission formats.
Spotline is available with single-sided output as standard or optional double-sided emission, allowing different lighting requirements to share the same precise optical character.
- Single-sided
- Focused directional light toward a defined surface or zone.
- Double-sided
- Balanced output in two directions for wider spatial illumination.
- Design consistency
- One luminaire family for multiple lighting functions across a project.
03 / INSTALLATION
Designed around the architecture.
Spotline supports wall-mounted, ceiling-mounted and suspended installation, with adjustable brackets and optional floor-standing configurations for different architectural layouts.
- Mounting options
- Wall-mounted, ceiling-mounted or suspended.
- Adjustable brackets
- Bracket spacing can be coordinated with site and installation requirements.
- Floor-standing option
- Optional support structures extend Spotline into freestanding applications.
04 / PROTECTION & DURABILITY
Built for precise performance, indoors or out.
A sealed IP65 construction and IK10-rated PC housing protect Spotline’s optical system for dependable use in indoor, outdoor and high-traffic architectural environments.
- Ingress protection
- IP65-rated protection against dust and water ingress.
- Impact resistance
- IK10-rated PC housing for exposed public environments.
- Material stability
- UV-resistant housing designed to maintain long-term optical clarity.
SPOTLINE SERIES / TECHNICAL SPECIFICATIONS
Clear engineering data.
Project-ready configuration.
Spotline is an architectural tubular luminaire integrating micro-reflector cup optics for precise, low-glare directional accent lighting. Configurable in Ø45 and Ø70 mm profiles, continuous custom lengths (300–3000 mm), single- or double-sided light distributions, and versatile wall, ceiling, or suspended mounting.
01 / OPTICS & ELECTRICAL Technical Characteristics & Optical Systems
| Configuration Parameter | Available Options | Project Note |
|---|---|---|
| Profile Diameter | Ø45 mm / Ø70 mm | Selected according to architectural spatial scale and output |
| Fixture Length | 300–3000 mm (custom continuous lengths) | Factory-cut lengths coordinated with internal LED modules |
| Power Range | 10–70 W (depending on length and output) | Scalable power based on fixture dimensions and project target |
| Optical System | Integrated micro-reflector cup optics | Reduced direct view of LED source & precision beam control |
| Light Distribution | Single-sided emission / Double-sided emission | Single-sided standard; symmetrical double-sided on request |
| Controls | ON/OFF · TRIAC · 0–10 V · DALI (DT6/DT8) | Sensor version / Emergency version available |
Light Source & CCT
- LED source: SMD3030 LEDs
- CRI: ≥80 (CRI 90 optional)
- Color consistency: MacAdam ≤3 SDCM
- CCT: 2700K / 3000K / 4000K / 5000K / 6000K
- Option: Tunable White (on request)
- Lifetime: 50,000 h (L80/B10 @ 25°C)
Optical System & Glare Control
- Optical system: Integrated micro-reflector cup optics
- Light distribution: Single-sided emission (standard)
- Option: Double-sided emission (on request)
- Glare control: Reduced direct view of LED source
- Beam options: 20° / 32.8° / 48° for precise light aiming
Electrical & Controls
- Input voltage: 220–240 V AC (100–277 V AC optional), 50/60 Hz
- Power factor: >0.95
- Power range: 10–70 W (depending on length and output)
- Control options: ON/OFF · TRIAC · 0–10 V · DALI (DT6/DT8 on request)
- Options: Sensor version / Emergency version
- Electrical class: Class I
02 / SITE COORDINATION Installation, Maintenance & Wiring
Connection & Operating
- Sealed cable entry with stainless steel cable gland
- Cable range: Ø5–14 mm
- Disconnectable terminal block
- Up to 3 × 2.5 mm² conductors
- Operating temperature: −25°C to +45°C
Mounting & Coordination
- 2 Mounting brackets with adjustable spacing
- Wall, ceiling or suspended installation
- Suspension kits available
- Vertical or horizontal mounting orientation
- Optional floor-standing configurations available
03 / MATERIALS & CRAFTSMANSHIP Housing Envelope, Structure & End Caps
Housing Envelope
- Co-extruded polycarbonate (PC) or PMMA tube
- UV-stable, impact-resistant
- For indoor and outdoor use
- Tube diameter: Ø45 mm / Ø70 mm
- Custom lengths available (300–3000 mm)
Structure & Mechanics
- PC diffuser housing
- Integrated micro-cup reflector array
- Precision aluminum end caps
- Stainless steel fixing components
- High-durability internal sealing gaskets
Customization & Finishes
- Custom lengths available on request (300–3000 mm)
- Surface finishes: matte textured / smooth gloss
- Black anodized and silver anodized architectural finishes
- Control options configurable per project (ON/OFF, TRIAC, 0–10 V, DALI; sensor / emergency on request)
- Single-sided / double-sided emission options
04 / COMPLIANCE & STANDARDS Standards, Protection & Factory Warranty
Ingress Protection
- IP65 standard
- IP69K optional
Impact Resistance
- IK10 (PC)
- IK08 (PMMA)
Fire Performance
- Glow-wire test: 960°C
- CE and RoHS compliant manufacturing
Warranty & Applications
- 5-Year whole fixture warranty
- Applications: Architectural indoor and outdoor environments
Architectural Presence
Across Space & Scale
From hospitality corridors and retail feature walls to corporate atriums and exterior perimeters, Spotline integrates micro-reflector cup optics with directional accent beam control, single- or double-sided output, and certified IP65/IK10 durability.
Related Products
Explore complementary architectural tubular luminaires across task-oriented floor formats, adjustable directional louvers, minimalist linear diffusers, and perforated texture systems.
Swipe to explore
Linea Task
An ergonomic architectural floor luminaire providing precise directional illumination for executive workspaces, reading lounges, and hospitality suites.
View product
Aero
An innovative tubular luminaire featuring manually adjustable aluminum louvers and direct wall integration for precision on-site light aiming.
View product
Corbusier
A minimalist tubular luminaire delivering high-efficiency diffused linear illumination for clean architectural lines in commercial and hospitality projects.
View product
Perfo 360
A distinctive tubular luminaire with internal perforated stainless-steel screening, delivering controlled glare and rhythmic architectural presence.
View productCustomized & Standard Tubular Lighting Solutions
From standard batch orders to tailored OEM/ODM specifications. Tell us what you need, and our engineering team will provide custom configurations and competitive quotes.
- Flexible OEM / ODM options
- Direct factory volume pricing
- Datasheets & compliance files
- Response within 1 business hour